For the first phase we will configure the LAN connection . To use Telkom Speedy we need 2 LAN cards, LAN cards will be connected to the AP 1 and 2 LAN card for internet connection. For this final project there is only one LAN card, and will be connected to the AP, while the LAN card 2 will appear automatically when the network is connected to the internet from HP . As for what we'll do is change the name of the connection to be easy in the organization after giving IP address (IP address) for each of the LAN car . Well the following description more.
- Open the Network Connections window then right click on the area Local Area Connection (LAN card 1) and then click Rename and then rename it with Hotspot Connection. To use 2 LAN cards, LAN cards into 2 is named Internet Connection .
- Continuing the previous step, right-click again on the local internet connection (LAN card 2), but this time select Properties and then the Internet Connection window that pops up click Internet Protocol (TCP / IP) and click Properties again. (to use 2 LAN card)
- Now our task is to enter the IP address, Subnet, gateway, dns and others that you get from your ISP. If you already connect the UTP cable from ADSL modem or internet radio to the LAN card 2 port (for use 2 LAN card). For the spelling of this thesis, the internet connection will not enter the IP address or the other, because it is automatically installed on the network that we get from HP. We just need to connect the phone to computer with the data cable, then connect to it with a Sony Ericsson PC Suite software comes from HP. Then the computer will automatically receive the Internet network of HP and will make 2 LAN card automatically as well.
- To check the success of the settings we try to open the internet page of the computer. If success means our success configuration.
- The next step we will disable the DHCP service AP. How: follow the second step but this time we right click on the LAN 1 (hotspot connection) further specify the IP address following the AP 's default IP address range . For example, if the IP address 192.168.0.2 AP, so the LAN card in step 1 give the IP address 192.168.0.1. Another way that we can apply is to let the LAN card 2 get a dynamic IP address from the window AP.jadi charging option circumference IP address click Obtain an IP address automatically.
- The next step connect the AP to a computer via a LAN card type 1 using a straight UTP cable. Remember ! We connect it to the Ethernet port to the WAN port instead of AP.
- Next go to the main page of the AP configuration using the default web browser by typing the IP address of the AP section of his address bar.
- The next task assigned search menu to enable or disable the DHCP service on the AP. Do not forget to always save after making changes.
- AP configuration page last cap.
